4-Inch Submersible Pumps

4-inch submersible pumps are durable slurry pumps that work underwater for moving solids and liquids and can withstand the everyday use of pumping rocks and other abrasive materials. DAE Pumps manufactures low-cost high-performance 4-inch submersible pumps with the power and speed for transporting liquids and materials through a 4-inch discharge valve. The DAE Pumps 4-inch submersible pumps allow the most abrasive solids and sludge up to 1.5-inch in diameter to pass.

Dae Pumps offers a large selection of economical submersible slurry pumps in multiple sizes and power options to meet your specific application needs. Our submersible slurry pumps are heavy-duty, reliable pumps that last because of the rugged constructed body, head, motor, and watertight seals. We manufacture a variety of 4-inch pumps with options of an open stand or a strainer with an agitator for suctioning materials. DAE Pumps 4-inch submersible pumps will transport sand, sludge, and rock up to 792 GPM at 30 HP.

DAE Pumps S-Series Wastewater Lagoon

Our Tampa Series and Galveston Series pumps can handle the toughest of jobs in dredging, suctioning, and pumping for a variety of industrial uses. The 4-inch submersible slurry pumps are ideal for performing in extreme applications in the mining, dredging, minerals processing, ash pumping, wastewater, dewatering, chemical, oil, sludge, paste, and many other industries. These efficiently designed tools pump sludge, muck, sand, ash, coal fly ash, slurry, and a variety of other abrasive materials.

Gulfport D540H Submersible Drainage Pumps – 4″ / 310 GPM / 8.5 HP

The rugged DAE Pumps Gulfport D540H drainage pumps move clean and dirty water with small solids up to .32-inches. These submersible drainage pumps with 4-inch discharge can move liquid at 310 GPM up to 135-feet via 8.5 horsepower. This 60Hz pump is available in 575-600V.

The Gulfport D540H is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance.

Gulfport D540S Submersible Drainage Pumps – 4″ / 620 GPM / 8.5 HP

Offering the same high-quality, the DAE Pumps Gulfport D540S drainage pumps move clean and dirty water with small solids up to .32-inches. These durable drainage pumps with 4-inch discharge can move liquid at 310 GPM up to 135-feet via 8.5 horsepower. This 60Hz pump is available in 460V and 575-600V.

The Gulfport D540S is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance.

Gulfport D640X Submersible Drainage Pumps – 4″ / 260 GPM / 11.5 HP

DAE Pumps Gulfport D640X drainage pumps handle clean and dirty water with small solids up to .32-inches. These rugged drainage pumps with 4-inch discharge can move liquid at 260 GPM up to 250-feet via 11.5 horsepower. This 60Hz pump is available in 575-600V.

The Gulfport D640X is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance.

Gulfport D640H Submersible Drainage Pumps – 4″ / 340 GPM / 11.5 HP

DAE Pumps Gulfport D640H drainage pumps move clean and dirty water with small solids up to .32-inches. These reliable drainage pumps with 4-inch discharge can move liquid at 340 GPM up to 170-feet via 11.5 horsepower. This 60Hz pump is available in 575-600V.

The Gulfport D640H is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance.

Gulfport D640S Submersible Drainage Pumps – 4″ / 700 GPM / 11.5 HP

The reliable DAE Pumps Gulfport D640S drainage pumps handle clean and dirty water with small solids up to .32-inches. These durable submersible pumps with 4-inch discharge can move liquid at 700 GPM up to 100-feet via 11.5 horsepower.  This 60Hz pump is available in 460V and 575-600V.

The Gulfport D640S is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance.

Gulfport D740H Submersible Drainage Pumps – 4″ / 300 GPM / 15 HP

The high-quality DAE Pumps Gulfport D740H drainage pumps move clean and dirty water with small solids up to .27-inches. These reliable drainage pumps with 4-inch discharge can move liquid at 300 GPM up to 254-feet via 15 horsepower. This 60Hz pump is available in 440-480V.

The Gulfport D740H is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance.

Gulfport D840H Submersible Drainage Pumps – 4″ / 760 GPM / 31 HP

DAE Pumps Gulfport D840H drainage pumps process clean and dirty water with small solids up to .47-inches. These rugged submersible pumps with 4-inch discharge can move liquid at 760 GPM up to 240-feet via 31 horsepower. This 60Hz pump is available in 460V, 480V, and 575-600V.

The Gulfport D840H is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance.

Gulfport D940H Submersible Drainage Pumps – 4″ / 560 GPM / 36 HP

DAE Pumps Gulfport D940H drainage pumps handle clean and dirty water with small solids up to .27-inches. The most powerful of our 4-inch drainage pumps come with a 4-inch discharge and move liquid at 560 GPM up to 325-feet via 36 horsepower. This 60Hz pump is available in 440-480V.

The Gulfport D940H is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance.

Sonora S540 Sludge Pumps – 4″ / 365 GPM / 7 HP

The high-performing DAE Pumps Sonora S540 Submersible Sludge Pumps handle thick, soft, wet mud and sludge with solids up to 2-inches. These heavy-duty submersible sludge pumps with 4-inch discharge can move material at 365 GPM up to 92-feet via 7 horsepower. This 60Hz pump is available in 230V and 460V options.

The Sonora S540 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

Sonora S640 Sludge Pumps – 4″ / 420 GPM / 9.2 HP

DAE Pumps Sonora S640 Submersible Sludge Pumps offer the ultimate performance in moving mud and sludge with solids up to 2-inches. With a 4-inch discharge, these sludge pumps transfer material at 420 GPM up to 100-feet via a 9.2 HP motor.  This 60Hz pump is available in 230V and 460V options.

The Sonora S640 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

Miramar L540 Submersible Slurry Pumps – 4″ / 308 GPM / 7 HP

The rugged DAE Pumps Miramar L540 Submersible Slurry Pumps process abrasive materials with solids up to 1-inch. These durable slurry pumps with 4-inch discharge move material at 308 GPM up to 57-feet via a 7 HP motor.  This 60Hz pump is available in 460V.

The Miramar L540 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

Miramar L640 Submersible Slurry Pumps – 4″ / 440 GPM / 12 HP

Offering the same high-quality, the DAE Pumps Miramar L640 Submersible Slurry Pumps move abrasive materials with solids up to 1-inch. With a 4-inch discharge, these heavy-duty slurry pumps process material at 440 GPM up to 75-feet via a 12 HP motor.  This 60Hz pump is available in 460V.

The Miramar L640 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

Miramar L740 Submersible Slurry Pumps – 4″ / 616 GPM / 15 HP

The heavy-duty DAE Pumps Miramar L740 Submersible Slurry Pumps transfer abrasive materials with solids up to 1-inch. With a 4-inch discharge, the Miramar L740 slurry pumps move material at 616 GPM up to 85-feet via a 15 HP motor.  This 60Hz pump is available in 460V.

The Miramar L740 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

Miramar L840 Submersible Slurry Pumps – 4″ / 660 GPM / 20 HP

DAE Pumps Miramar L840 Submersible Slurry Pumps move abrasive materials with solids up to 1-inch. With a 4-inch discharge, these reliable slurry pumps process material at 660 GPM up to 98-feet via a 20 HP motor.  This 60Hz pump is available in 460V.

The Miramar L840 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

Miramar L940 Submersible Slurry Pumps – 4″ / 1233 GPM / 50 HP

The high power 4-inch DAE Pumps Miramar L940 Submersible Slurry Pumps move abrasive materials with solids up to 1.5-inches. These 4-inch discharge submersible slurry pumps move liquids and solids at 880 GPM up to 171-feet via a 50 HP motor.  This 60Hz pump is available in 460V.

The Miramar L940 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

DAE Pumps 437-P Submersible Slurry Pump

Tampa 437 Submersible Slurry Pumps – 4″ / 476 GPM / 5 HP

DAE Pumps Tampa 437 Submersible Slurry Pumps are rugged, reliable, and cost-effective pumps for transporting slurry, sand, and a variety of other abrasive materials. The durable DAE Pumps Tampa 437 offers an open stand or strainer, and agitator provides improved suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 437 submersible slurry pumps transfer solids and liquids at a flow rate of up to 476 GPM and with 5 HP.
DAE Pumps 455-P Submersible Slurry Pump

Tampa 455 Submersible Slurry Pumps – 4″ / 594 GPM / 7.5 HP

DAE Pumps 455-P Submersible Slurry Pumps are rugged, reliable, and cost-effective pumps for transporting slurry, sand, and a variety of other abrasive materials. The DAE Pumps 455-P with an open stand and agitator allows for ideal suction and movement of solids up to 1-inch with a 4-inch discharge. The ergonomic 455-P submersible slurry pumps transfer solids and liquids at a flow rate of up to 594 GPM and with 7.5 HP.

DAE Pumps 475-P Submersible Slurry Pump

Tampa 475 Submersible Slurry Pumps – 4″ / 655 GPM / 10 HP

DAE Pumps Tampa 455 Submersible Slurry Pumps are rugged, reliable, and cost-effective pumps for transporting slurry, sand, and a variety of other abrasive materials. DAE Pumps Tampa 455 offers an open stand or strainer, and agitator that provides greater suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 455 submersible slurry pumps transfer solids and liquids at a flow rate of up to 594 GPM and with 7.5 HP.
DAE Pumps 4110-P Submersible Slurry Pump

Tampa 4110 Submersible Slurry Pumps – 4″ / 819 GPM / 15 HP

DAE Pumps Tampa 4110 Submersible Slurry Pumps are rugged, reliable, and cost-effective pumps for transporting slurry, sand, and a variety of other abrasive materials. The efficient DAE Pumps Tampa 4110 offers an open stand or strainer, and agitator that provides enhanced suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 4110 submersible slurry pumps transfer solids and liquids at a flow rate of up to 819 GPM and with 15 HP.
DAE Pumps 3304-SLD Submersible Sludge & Slurry Pump

Galveston 3304 Submersible Sludge and Slurry Pumps – 4″ / 792 GPM / 30 HP

The heavy-duty and reliable DAE Pumps Galveston 3304 Submersible Sludge and Slurry Pumps are the latest technology in submersible pumps for transporting slurry, sand, and a variety of other abrasive materials. DAE Pumps Galveston 3304 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 1.5-inches with a 4-inch discharge. The Galveston 3304 submersible slurry pumps transfer solids and liquids at a flow rate of up to 792 GPM and with 30 HP.

Selecting a Submersible Slurry Pump

Choosing the right slurry pump for the job is essential in efficiently transporting large volumes of materials, effectively saving time and money. Most importantly, using a submersible slurry pump with the proper flow rate, head, impeller, and agitator will expedite the process. The size and shape of the head and the discharge outlet determine the flow rate of a slurry pump. The pump head sucks in sludge, sand, and rocks, while the discharge outlet sends out the material.

The submersible slurry pump comes with an open stand or strainer design, and an agitator or impeller to prevent too large of rocks from entering and clogging the pump. Next, the larger the head and discharge outlet, the more material can be moved. A slurry hose connects to the discharge outlet to transport the materials. Because the submersible slurry pump is in water, there is no need to prime the pump, thus providing a very efficient way of moving slurry.

DAE Pumps SLD-Series Salt Mineral Mining

Features of DAE Pumps Submersible Slurry Pumps

  • Capable of Pumping Wide Array of Materials
  • Large Selection of Pumps and Configurations
  • Pump Abrasive and Gritty Material with Ease
  • High Tolerance Between Impeller and Pump Casing, Allowing Larger Solids
  • Low Maintenance

Submersible Pumps

DAE Pumps 4-inch submersible pumps are commercial slurry pumps. We offers a large selection of commercial, industrial, and heavy-duty submersible slurry pumps in multiple sizes and power options to meet your specific application needs. Choose from a variety of options in our Tampa Series and Galveston Series pumps. 

 

Additional Pump Sizes

3-Inch Submersible Pumps

The low-cost 3-inch submersible pumps provide power and speed for transporting liquids and light materials through a 3-inch discharge valve. The DAE Pumps 3-inch submersible pumps allow the most abrasive solids and sludge up to 2-inch in diameter to pass. We manufacture a couple of versions of the 3-inch pump that offer the same rugged construction body, head, motor, and watertight seals as all our models. Options include an open stand or a strainer with an agitator for suctioning materials. DAE Pumps 3-inch submersible pumps will transport sand, sludge, and rock up to 449 GPM at 11.5 HP.

See our 3-inch submersible pump models: Gulfport D530H, Gulfport D630X, Gulfport D630HSonora S330Miramar L430Tampa 337, and Tampa 355.

6-Inch Submersible Pumps

The cost-efficient 6-inch submersible pumps provide even higher power and speed for transporting liquids and materials through the 6-inch discharge. These models continue with the same rugged construction body, head, motor, and all-important watertight seals, and offer an open stand or a strainer with an agitator for suctioning materials. The 6-inch submersible pumps allow for even larger sizes of abrasive solids and sludge up to 2.5-inch in diameter to pass. Variations of DAE Pumps 6-inch submersible pumps will transport sand, sludge, and rock up to 2422 GPM at 102 HP.

See our 6-inch submersible pump models: Gulfport D760H, Gulfport D760L, Gulfport D860SGulfport D960H, Gulfport D960LMiramar L1060Miramar L1160Tampa 6110Tampa 6150Tampa 6150-LTampa 6220Galveston 3306Galveston 3506Galveston 3506-H, and Galveston 3756.

8-Inch Submersible Pumps

Heavy-duty 8-inch submersible pumps provide the highest power and speed for transporting liquids and materials. These submersible pumps continue the same rugged construction body, head, motor, and all-important watertight seals, along with options of an open stand or a strainer with an agitator. The 8-inch submersible pumps allow for the largest sizes of abrasive solids and sludge up to 2.5-inch in diameter to pass through the 8-inch discharge valve up to 2112 GPM at 75 HP.

See our 8-inch submersible pump models: Tampa 8220Galveston 3508, and Galveston 3758.

10-Inch Submersible Pumps

Heavy-duty 10-inch submersible dewatering pumps provide the highest power and speed for transporting liquids and materials. These dewatering pumps continue the same rugged construction body, head, motor, and all-important watertight seals. The 10-inch submersible pumps allow for the largest volume of liquid to pass through the 10-inch discharge valve up to 6100 GPM at 84 HP.

See our 10-inch submersible pump models: Gulfport 1010S.

Accessories:

DAE Pumps 4-inch submersible slurry pumps meet your specific slurry pumping needs. Furthermore, we provide complete solutions for transporting materials with slurry hoses, slurry flow meters, power meters, and more. Choose from multiple sizes of slurry hoses for the transferring of materials, wireless flow meters for measuring the flow rate in gallons per minute of liquid, and hydraulic power units for operation. Parts are always in stock and available for immediate shipping to anywhere in the US and the world.

Get in Touch