4″ Slurry Discharge Hose
4″ slurry discharge hoses, also known as dredge hoses, provide the safe and efficient transferring of sludge, slurry, abrasive solids, and corrosive material. Suitable for use in dredging, mining, oil, construction, agriculture, sewage, wastewater, and chemical industries. DAE Pumps 4″ slurry discharge hose is the best on the market at handling the most abrasive slurry. They easily connect to the discharge end of dredge and slurry pumps with a snug fit. These reliable hoses operate at pressures of up to 150 PSI.
DAE Pumps dredge hoses are reinforced with steel braided synthetic cord incorporating a steel wire helix. The inner rubber liner offers abrasion-resistant hose rubber of the highest quality, and the outer cover is developed with the most aging resistance and corrosion-resistant material. The bending angle working condition of the DAE Pumps slurry hoses is from 0°-45°, and the ideal working temperature is between -20°C to 50°C. The flange is a standard ANSI 150 PSI fixed flange. See our other sizes of slurry discharge hose.
- Highly Resistant Inner Rubber Compound
- Capable of Handling High Solids
- High Viscosity/Gravity Pumping
- High Abrasives Pumping
- Low pH & Chemical Pumping
- Designed to Prevent and Reduce Clogs
- Longer Lifespan & Minimal Downtime
4″ Slurry Discharge Hose
DAE Pumps slurry discharge hoses are made with an inner layer that is 8mm thick for long-lasting durability. These heavy-duty hoses are made with carbon steel and with a working pressure of 150 PSI. The Dredge hose sizes are determined by the inner diameter in inches. We carry standard 10-meter length hoses and can custom-build up to that length.
|Product Name||SLURRY DISCHARGE HOSE|
|Technical Parameters||Tube: NR, BR, SBR
Reinforcement: High tensile strength fabrics with helix steel wire
Cover: NR, CRNo Negative Pressure
|Working Temperatures||20℃ to 80℃|
|Flange||Standard ANSI 150 PSI Fixed Flange|
|Inner Diameter||Outer Diameter||Thickness of Inner Layer||Working Pressure||Length||Flange ANSI 150 PSI|
Standard ANSI 150 psi Flange Specification
|Normal Diameter||Number of Bolt Holes||Diameter of Bolt Holes||Flange Thickness||Outer Diameter of Flange|
See our variety of other accessories for complete solutions to all your slurry pumping needs. We also offer slurry flow meters to monitor the material flow rate, hydraulic power units, and other accessories. All our parts are always in stock and available for immediate shipping to anywhere in the US and the world.