Dredge & Slurry Hoses For Transferring Solids | DAE Pumps
Dredge Hoses

Dredge Hoses

Dredge hoses, also known as slurry hoses, provide the safe and efficient transferring of sludge, slurry, abrasive solids, and corrosive material. Suitable for use in dredging, mining, oil, construction, agriculture, sewage, wastewater, and chemical industries. DAE Pumps dredge hoses are the best on the market at handling the most abrasive slurry. They easily connect to the discharge end of dredge and slurry pumps with a snug fit. We make 4-inch, 6-inch, 8-inch, 10-inch, and 12-inch hoses at lengths of 10 meters (33 feet). These reliable hoses operate at pressures of up to 150 PSI.

DAE Pumps dredge hoses are reinforced with steel braided synthetic cord incorporating a steel wire helix. The inner rubber liner offers abrasion-resistant hose rubber of the highest quality, and the outer cover is developed with the most aging resistance and corrosion-resistant material. The bending angle working condition of the DAE Pumps slurry hoses is from 0°-45°, and the ideal working temperature is between -20°C to 50°C. The flange is a standard ANSI 150 PSI flange with one side fixed and the other side is movable.

Get Pricing

Dredge Hoses

Features:

  • Highly Resistant Inner Rubber Compound
  • Capable of Handling High Solids
  • High Viscosity/Gravity Pumping
  • High Abrasives Pumping
  • Low pH & Chemical Pumping
  • Designed to Prevent and Reduce Clogs
  • Longer Lifespan & Minimal Downtime

Dredge Hose Specs

DAE Pumps hoses are made with an inner layer that is 8mm thick for long-lasting durability. These heavy-duty hoses are made with carbon steel and with a working pressure of 150 PSI. The Dredge hose sizes are determined by the inner diameter in inches. We carry standard 10-meter length hoses and can custom-build up to that length.

Product Name SLURRY DISCHARGE HOSE
Technical Parameters Tube: NR, BR, SBR
Reinforcement: High tensile strength fabrics with helix steel wire
Cover: NR, CRNo Negative Pressure
Safety Factor 3:1
Working Temperatures 20℃ to 80℃
Flange Standard ANSI 150 PSI Flange, one side fixed, the other side is movable

Standard ANSI 150 psi Flange Specification

Normal Diameter Number of Bolt Holes Diameter of Bolt Holes Flange Thickness Outer Diameter of Flange
4″ 8 18 mm 22.5 mm 228 mm
6″ 8 22 mm 24 mm 278 mm
8″ 8 22 mm 29 mm 405 mm
10″ 12 26mm 30mm 405mm
12″ 12 26mm 32mm 485mm

Bend Radius

Dredge Hose Applications

Other Accessories

See our variety of other accessories for complete solutions to all your slurry pumping needs. We also offer slurry flow meters to monitor the material flow rate, hydraulic power units, and other accessories. All our parts are always in stock and available for immediate shipping to anywhere in the US and the world.