4-Inch Submersible Pumps
Dae Pumps offers a large selection of economical submersible slurry pumps in multiple sizes and power options to meet your specific application needs. Our submersible slurry pumps are heavy-duty, reliable pumps that last because of the rugged constructed body, head, motor, and watertight seals. We manufacture a variety of 4-inch pumps with options of an open stand or a strainer with an agitator for suctioning materials. DAE Pumps 4-inch submersible pumps will transport sand, sludge, and rock up to 792 GPM at 30 HP.
Our Tampa Series and Galveston Series pumps can handle the toughest of jobs in dredging, suctioning, and pumping for a variety of industrial uses. The 4-inch submersible slurry pumps are ideal for performing in extreme applications in the mining, dredging, minerals processing, ash pumping, wastewater, dewatering, chemical, oil, sludge, paste, and many other industries. These efficiently designed tools pump sludge, muck, sand, ash, coal fly ash, slurry, and a variety of other abrasive materials.
DatasheetSonora S540 Sludge Pumps – 4″ / 365 GPM / 7 HP
The high-performing DAE Pumps Sonora S540 Submersible Sludge Pumps handle thick, soft, wet mud and sludge with solids up to 2-inches. These heavy-duty submersible sludge pumps with 4-inch discharge can move material at 365 GPM up to 92-feet via 7 horsepower. This 60Hz pump is available in 230V and 460V options.
The Sonora S540 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.
Sonora S640 Sludge Pumps – 4″ / 420 GPM / 9.2 HP
DAE Pumps Sonora S640 Submersible Sludge Pumps offer the ultimate performance in moving mud and sludge with solids up to 2-inches. With a 4-inch discharge, these sludge pumps transfer material at 420 GPM up to 100-feet via a 9.2 HP motor. This 60Hz pump is available in 230V and 460V options.
The Sonora S640 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.
Tampa 437 Submersible Slurry Pumps – 4″ / 476 GPM / 5 HP
Tampa 455 Submersible Slurry Pumps – 4″ / 594 GPM / 7.5 HP
DAE Pumps 455-P Submersible Slurry Pumps are rugged, reliable, and cost-effective pumps for transporting slurry, sand, and a variety of other abrasive materials. The DAE Pumps 455-P with an open stand and agitator allows for ideal suction and movement of solids up to 1-inch with a 4-inch discharge. The ergonomic 455-P submersible slurry pumps transfer solids and liquids at a flow rate of up to 594 GPM and with 7.5 HP.
Tampa 475 Submersible Slurry Pumps – 4″ / 655 GPM / 10 HP
Tampa 4110 Submersible Slurry Pumps – 4″ / 819 GPM / 15 HP
Selecting a Submersible Slurry Pump
Choosing the right slurry pump for the job is essential in efficiently transporting large volumes of materials, effectively saving time and money. Most importantly, using a submersible slurry pump with the proper flow rate, head, impeller, and agitator will expedite the process. The size and shape of the head and the discharge outlet determine the flow rate of a slurry pump. The pump head sucks in sludge, sand, and rocks, while the discharge outlet sends out the material.
The submersible slurry pump comes with an open stand or strainer design, and an agitator or impeller to prevent too large rocks from entering and clogging the pump. Next, the larger the head and discharge outlet, the more material can be moved. A slurry hose connects to the discharge outlet to transport the materials. Because the submersible slurry pump is in water, there is no need to prime the pump, thus providing a very efficient way of moving slurry.
Features of DAE Pumps Submersible Slurry Pumps
- Capable of Pumping Wide Array of Materials
- Large Selection of Pumps and Configurations
- Pump Abrasive and Gritty Material with Ease
- High Tolerance Between Impeller and Pump Casing, Allowing Larger Solids
- Low Maintenance
Submersible Pumps
We offer a large selection of commercial, industrial, and heavy-duty submersible slurry pumps in multiple sizes and power options to meet your specific application needs. Choose from a variety of options. Check out all-electric and hydraulic submersible slurry pumps available.
Additional Pump Sizes
3-Inch Submersible Pumps
The low-cost 3-inch submersible pumps provide power and speed for transporting liquids and light materials through a 3-inch discharge valve. The DAE Pumps 3-inch submersible pumps allow the most abrasive solids and sludge up to 2-inch in diameter to pass. We manufacture a couple of versions of the 3-inch pump that offer the same rugged construction body, head, motor, and watertight seals as all our models. Options include an open stand or a strainer with an agitator for suctioning materials. DAE Pumps 3-inch submersible pumps will transport sand, sludge, and rock up to 449 GPM at 11.5 HP.
See our 3-inch submersible pump models: Sonora S330, Tampa 337, and Tampa 355.
6-Inch Submersible Pumps
The cost-efficient 6-inch submersible pumps provide even higher power and speed for transporting liquids and materials through the 6-inch discharge. These models continue with the same rugged construction body, head, motor, and all-important watertight seals, and offer an open stand or a strainer with an agitator for suctioning materials. The 6-inch submersible pumps allow for even larger sizes of abrasive solids and sludge up to 2.5-inch in diameter to pass. Variations of DAE Pumps 6-inch submersible pumps will transport sand, sludge, and rock up to 2422 GPM at 102 HP.
See our 6-inch submersible pump models: Tampa 6110, Tampa 6150, Tampa 6150-L, Tampa 6220.
8-Inch Submersible Pumps
Heavy-duty 8-inch submersible pumps provide the highest power and speed for transporting liquids and materials. These submersible pumps continue the same rugged construction body, head, motor, and all-important watertight seals, along with options of an open stand or a strainer with an agitator. The 8-inch submersible pumps allow for the largest sizes of abrasive solids and sludge up to 2.5-inch in diameter to pass through the 8-inch discharge valve up to 2112 GPM at 75 HP.
See our 8-inch submersible pump models: Tampa 8220.
10-Inch Submersible Pumps
Heavy-duty 10-inch submersible dewatering pumps provide the highest power and speed for transporting liquids and materials. These dewatering pumps continue the same rugged construction body, head, motor, and all-important watertight seals. The 10-inch submersible pumps allow for the largest volume of liquid to pass through the 10-inch discharge valve up to 6100 GPM at 84 HP.
See our 10-inch submersible pump models:
Accessories:
DAE Pumps 4-inch submersible slurry pumps meet your specific slurry pumping needs. Furthermore, we provide complete solutions for transporting materials with slurry hoses, slurry flow meters, power meters, and more. Choose from multiple sizes of slurry hoses for the transferring of materials, wireless flow meters for measuring the flow rate in gallons per minute of liquid, and hydraulic power units for operation. Parts are always in stock and available for immediate shipping to anywhere in the US and the world.
